Hey Edwin, the Blue Ox base plate kit part # BLU43FR is a confirmed fit for a 2021 Buick Encore GX AWD and would work great with a Blue Ox tow bar like the part # BX7420.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front... view full answer...
Installation of the # DM49YV will require drilling one hole with a 7/16 drill bit. Everything else uses the existing holes on your 2021 Buick Encore GX.
I have attached a link below which will provide you with a list of local installers near 55720. Anyone on that list should be able to handle the base plate installation, so feel free to reach out to them and compare installation costs. I also attached the written instructions for you below so you can see what the process is like. view full answer...
Yes, your 9511007 Demco Aluminator will work with your 2021 Buick Encore GX AWD. The tow bar is compatible with the Demco Tabless Base Plate Kit # DM49YV which is designed for AWD models (unless you have the Sport Touring) and has a high enough capacity to handle your vehicle. view full answer...
Hey Brad, that is a good question. The Roadmaster Battery Disconnect # RM-766 attaches to the positive battery post because that is what the polarity of the solenoid is designed for. This also allows for a positive current source for accessories such as a breakaway switch or stop light switch.
If you were to disconnect the battery without using a Roadmaster Battery Disconnect, you would just pull the negative cable off like it says in your manual. With the # RM-766 though it will connect... view full answer...
Go To Results